|
|
productronica
2005
November 15-18,
Trade Fair Centre, Munich / Germany
Crea exibits on Hall A1, Stand 434. We will show the latest MT-system
series testers.
Ask us for informations.
|
|
Nov.
2005
|
|
| |
|
|
High volume selection of
"button" diodes,
based on MTsystem tester.
Ask us for informations.
|
|
|
July. 2005
|
| |
|
|
CR20M
Blocking Voltage
Leakage Current
manual tester
|
|
|
Dec. 2004
|
- Output Voltage: up to 2000V
- Output Current: up to 50mA
- Programmable test current (Blocking Voltage test)
and voltage (Leakage Current test)
- Four selectable current ranges (50mA, 10mA, 1mA,
100uA)
- Programmable Thresholds for Pass/Fail
- Four selectable test timings
(10ms, 50ms, 200ms, 60s)
- Green/Red light and buzzer on results Pass/Fail
- Automatic start on device detection (only Diodes)
- Handshake signals available for remote control
|
| |
|
|
electronica
2004
November 09-12,
Trade Fair Centre, Munich / Germany
Crea exibits on Hall A1, Stand 132. We will show the latest MT-system
series testers.
Ask us for informations.
|
|
Nov.
2004
|
|
| |
|
|
Automated selection of
TO-220 / TO-247 components,
based on MTsystem tester.
Ask us for informations.
|
|
|
Sept. 2004
|
|
| |
|
|
Test
and classify your products in our laboratories
See more
|
|
Sept.
2002
|
|
| |
|
|
Download area activated
Complete documentation in pdf
format available HERE
|
|
Sept.
2002
|
|
| |
|
|
Semi-automated test line
Crea combined three standard MT-system
testers, barcode readers-printers and a supervisor software
into a semi automated test line:
|
|
Each tester is equipped with
its own multi-junction matrix and a MT-UNI jig which reads
the barcode label on the DUT (whenever the jig door is closed),
loads or creates the corrensponding testprogram, and exports
the results to the supervisor software which collects data
from the three stations and classifies the DUT according to
the results and to the product assignment plan. The operator
(or the robot if any) just has to place the modules into the
JIGs and close the door; no particular timing or sequence
is required.
|
|
|
July 2002
|
|
Each JIG can
accomodate different module layouts and packages, simply changing
the fixture; the three stations can be used as stand-alone testers
too, so maximum flexibilty is reached. |
Station #1:
forward test and gate parameters tests, 6 points matrix up to
3kA.
Station #2: cold reverse tests, 6 points matrix up to 9kV.
Station #3: hot reverse tests and insulation test, 6 points
matrix up to 9kV. |
|
| |
|
|
PCIM 2002
May 14-16, Nuremberg Exhibition Center / Germany
Crea exibits at PCIM on stand 424. We will show the new MT-system series
testers.
Ask us for informations
or to receive a free invitation.
|
|
|
May 2002
|
|
| |
|
|
